Horizontal Grinder Applications: From Land Clearing to Waste Recycling

Horizontal grinders are among the most versatile machines in the wood waste processing industry. A single horizontal grinder can handle land clearing debris, storm damage, waste wood recycling, shingle processing, and mulch production, often with just a screen change to adjust output size. This guide covers the main applications for horizontal grinders and recommends Bandit models for each.

Land clearing

Land clearing generates large volumes of trees, brush, and stumps that need to be reduced to a manageable size. A horizontal grinder processes this material on site, converting it to mulch or biomass that can be hauled away or spread on site for erosion control.

For land clearing, track-mounted grinders are preferred because they can move around the site to follow the clearing operation. The Bandit 2680XP (35-inch capacity, 755 HP, track only) is designed specifically for this application. Its track undercarriage allows it to maneuver on rough terrain, and the 42-inch diameter mill rotates at a lower RPM to grind larger diameter wood using less horsepower and fuel.

For high-volume land clearing where operations need maximum productivity, the HM6420 with 1,200 horsepower engine provides the most benefit.

Storm debris processing

After major weather disasters, municipalities and contractors face massive volumes of downed trees and brush. Horizontal grinders are the standard solution for processing this material as large amounts of debris can be piled in one center location allowing operations to efficiently feed this material through at high rates.

The key requirement for storm debris processing is throughput. You are not grinding a uniform feedstock. You are processing everything from small branches to entire trees, often mixed with dirt and debris picked up during collection. The HM6420 is often the preferred solution for this application as sometimes this material may contain contaminants.

Waste wood recycling

Wood recycling yards accept pallets, construction lumber, demolition wood, and other waste wood that would otherwise go to a landfill. A horizontal grinder processes this material into mulch, biomass fuel, or animal bedding, depending on the screen size and feedstock cleanliness.

For clean waste wood, a cuttermill or chipper mill works well. For wood that may contain contaminants, the hammermill is the right choice. The Bandit HM6420 hammermill (40-inch capacity, 1,200 HP) was introduced in 2024 specifically for grinding applications that may contain contaminants. Its 50-inch diameter by 66-inch wide mill with 20 hammers can handle material that would damage a cuttermill.

Shingle recycling

Asphalt shingles are a recyclable material when processed correctly. Ground shingles can be added to hot mix asphalt for road paving. Horizontal grinders process shingles into the small, uniform pieces required for asphalt recycling.

Shingle recycling requires a grinder that can handle the abrasive, sticky nature of asphalt. The cuttermill on Bandit horizontal grinders can process shingles, though tooth wear is higher than with wood. Screen selection is important to achieve the particle size required by asphalt plants.

Mulch and compost production

The mulch industry depends on horizontal grinders to produce landscape mulch from wood waste. Screen size controls the final product size, and colored mulch is produced by adding colorant during the grinding process.

The Bandit 1425 (14-inch capacity, 120-174 HP) has been a popular choice for mulch producers looking for a cost-effective machine to color mulch. Its entry-level size and price make it accessible for smaller operations. For higher-volume mulch production, the 1680XP (18-inch, 321-326 HP) or 2460XP (24-inch, 536 HP) provide more throughput.

Compost operations use horizontal grinders to reduce green waste and food waste to a consistent particle size that composts efficiently. The ability to change screens allows the same machine to produce coarse material for initial composting and finer material for finished compost.

Throughput expectations

Horizontal grinder throughput depends on engine power, mill size, feedstock, and screen size. On clean material:

  • Entry-level (134-174 HP): suitable for small operations and mulch coloring
  • Mid-range (321-536 HP): appropriate for medium-volume recycling and storm debris
  • High-production (755-1,200 HP): capable of 50 to 150 or more tons per hour on clean material

Actual throughput varies with material type, moisture content, feed consistency, and operator skill. Contact a Bandit dealer for production estimates based on your specific feedstock and production targets.

Why horizontal grinders over tub grinders

For most applications, horizontal grinders are preferred over tub grinders because they provide controlled feed, better safety (enclosed grinding chamber), and the ability to handle longer material. The feed conveyor on a horizontal grinder lets the operator manage the feed rate, which prevents overfeeding and produces more consistent output. The enclosed chamber contains debris, allowing horizontal grinders to operate safely near roads, buildings, and populated areas where a tub grinder’s open design would be a hazard.

For a detailed comparison, see our Beast horizontal grinder features and ROI analysis, which includes a full tub grinder vs horizontal grinder comparison. For the complete Bandit horizontal grinder lineup, visit The Beast horizontal grinders page.

Horizontal grinder applications FAQ

What is a horizontal grinder used for?

A horizontal grinder is used to process wood waste, green waste, storm debris, asphalt shingles, and other organic materials into mulch, biomass fuel, compost feedstock, and other end products. Applications include land clearing, waste wood recycling, storm debris processing, shingle recycling, and mulch or compost production.

How many tons per hour can a horizontal grinder process?

Throughput depends on engine power, mill size, feedstock, and screen size. Horizontal grinders in the 700 to 1,500 horsepower range can process 50 to 150 or more tons per hour on clean material. Smaller machines in the 120 to 536 horsepower range produce less, proportional to their power. Contact a Bandit dealer for estimates based on your feedstock.

Which horizontal grinder is best for land clearing?

For land clearing, the Bandit 2680XP (35-inch, 755 HP, track only) is designed for maneuverability on clearing sites. For high-volume land clearing, the HM6420 provides more production. The right model depends on site access, material volume, and whether you need track mobility.

Can a horizontal grinder process shingles?

Yes. Horizontal grinders with cuttermills can process asphalt shingles more efficiently because this type of mill cuts material apart reducing heat which is important when processing shingles. The end product is used in hot mix asphalt recycling. Tooth wear is higher with shingles than with wood, so Bandit offers special teeth for this application.

What is the difference between a horizontal grinder and a tub grinder for recycling?

A horizontal grinder uses a feed conveyor for controlled feeding into an enclosed chamber, which is safer and handles longer material. A tub grinder uses a rotating tub and gravity to feed an open hammermill. Horizontal grinders are generally preferred for recycling operations near populated areas due to safety and containment.

What size horizontal grinder do I need for a mulch operation?

For a small mulch operation or mulch coloring, the Bandit 1425 (14-inch, 120-174 HP) is a cost-effective entry point. For medium-volume mulch production, the 1680XP (18-inch) or 2460XP (24-inch) provide more throughput. For high-volume mulch production, the 3680XP or 4680XP are appropriate. Match the machine size to your daily production targets.

ADDITIONAL SALES & SERVICES ASSISTANCE

Looking for something specific? Check out all of our Bandit® Equipment, or use one click assistance to contact Bandit for immediate assistance or additional information.